cantata
stm32f1xx_hal_conf.h
Go to the documentation of this file.
1 
19 /* Define to prevent recursive inclusion -------------------------------------*/
20 #ifndef __STM32F1xx_HAL_CONF_H
21 #define __STM32F1xx_HAL_CONF_H
22 
23 #ifdef __cplusplus
24  extern "C" {
25 #endif
26 
27 /* Exported types ------------------------------------------------------------*/
28 /* Exported constants --------------------------------------------------------*/
29 
30 /* ########################## Module Selection ############################## */
35 #define HAL_MODULE_ENABLED
36  /*#define HAL_ADC_MODULE_ENABLED */
37 /*#define HAL_CRYP_MODULE_ENABLED */
38 #define HAL_CAN_MODULE_ENABLED
39 /*#define HAL_CAN_LEGACY_MODULE_ENABLED */
40 /*#define HAL_CEC_MODULE_ENABLED */
41 /*#define HAL_CORTEX_MODULE_ENABLED */
42 /*#define HAL_CRC_MODULE_ENABLED */
43 /*#define HAL_DAC_MODULE_ENABLED */
44 /*#define HAL_DMA_MODULE_ENABLED */
45 /*#define HAL_ETH_MODULE_ENABLED */
46 /*#define HAL_FLASH_MODULE_ENABLED */
47 #define HAL_GPIO_MODULE_ENABLED
48 /*#define HAL_I2C_MODULE_ENABLED */
49 /*#define HAL_I2S_MODULE_ENABLED */
50 /*#define HAL_IRDA_MODULE_ENABLED */
51 /*#define HAL_IWDG_MODULE_ENABLED */
52 /*#define HAL_NOR_MODULE_ENABLED */
53 /*#define HAL_NAND_MODULE_ENABLED */
54 /*#define HAL_PCCARD_MODULE_ENABLED */
55 /*#define HAL_PCD_MODULE_ENABLED */
56 /*#define HAL_HCD_MODULE_ENABLED */
57 /*#define HAL_PWR_MODULE_ENABLED */
58 /*#define HAL_RCC_MODULE_ENABLED */
59 /*#define HAL_RTC_MODULE_ENABLED */
60 /*#define HAL_SD_MODULE_ENABLED */
61 /*#define HAL_MMC_MODULE_ENABLED */
62 /*#define HAL_SDRAM_MODULE_ENABLED */
63 /*#define HAL_SMARTCARD_MODULE_ENABLED */
64 /*#define HAL_SPI_MODULE_ENABLED */
65 /*#define HAL_SRAM_MODULE_ENABLED */
66 #define HAL_TIM_MODULE_ENABLED
67 /*#define HAL_UART_MODULE_ENABLED */
68 /*#define HAL_USART_MODULE_ENABLED */
69 /*#define HAL_WWDG_MODULE_ENABLED */
70 
71 #define HAL_CORTEX_MODULE_ENABLED
72 #define HAL_DMA_MODULE_ENABLED
73 #define HAL_FLASH_MODULE_ENABLED
74 #define HAL_EXTI_MODULE_ENABLED
75 #define HAL_GPIO_MODULE_ENABLED
76 #define HAL_PWR_MODULE_ENABLED
77 #define HAL_RCC_MODULE_ENABLED
78 
79 /* ########################## Oscillator Values adaptation ####################*/
85 #if !defined (HSE_VALUE)
86  #define HSE_VALUE 8000000U
87 #endif /* HSE_VALUE */
88 
89 #if !defined (HSE_STARTUP_TIMEOUT)
90  #define HSE_STARTUP_TIMEOUT 100U
91 #endif /* HSE_STARTUP_TIMEOUT */
92 
98 #if !defined (HSI_VALUE)
99  #define HSI_VALUE 8000000U
100 #endif /* HSI_VALUE */
101 
105 #if !defined (LSI_VALUE)
106  #define LSI_VALUE 40000U
107 #endif /* LSI_VALUE */
115 #if !defined (LSE_VALUE)
116  #define LSE_VALUE 32768U
117 #endif /* LSE_VALUE */
118 
119 #if !defined (LSE_STARTUP_TIMEOUT)
120  #define LSE_STARTUP_TIMEOUT 5000U
121 #endif /* LSE_STARTUP_TIMEOUT */
122 
123 /* Tip: To avoid modifying this file each time you need to use different HSE,
124  === you can define the HSE value in your toolchain compiler preprocessor. */
125 
126 /* ########################### System Configuration ######################### */
130 #define VDD_VALUE 3300U
131 #define TICK_INT_PRIORITY 0U
132 #define USE_RTOS 0U
133 #define PREFETCH_ENABLE 1U
134 
135 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
136 #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
137 #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
138 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
139 #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
140 #define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
141 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
142 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
143 #define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
144 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
145 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
146 #define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
147 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
148 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
149 #define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
150 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
151 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
152 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
153 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
154 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
155 #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
156 #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
157 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
158 
159 /* ########################## Assert Selection ############################## */
164 /* #define USE_FULL_ASSERT 1U */
165 
166 /* ################## Ethernet peripheral configuration ##################### */
167 
168 /* Section 1 : Ethernet peripheral configuration */
169 
170 /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
171 #define MAC_ADDR0 2U
172 #define MAC_ADDR1 0U
173 #define MAC_ADDR2 0U
174 #define MAC_ADDR3 0U
175 #define MAC_ADDR4 0U
176 #define MAC_ADDR5 0U
177 
178 /* Definition of the Ethernet driver buffers size and count */
179 #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
180 #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
181 #define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
182 #define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
183 
184 /* Section 2: PHY configuration section */
185 
186 /* DP83848_PHY_ADDRESS Address*/
187 #define DP83848_PHY_ADDRESS 0x01U
188 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
189 #define PHY_RESET_DELAY 0x000000FFU
190 /* PHY Configuration delay */
191 #define PHY_CONFIG_DELAY 0x00000FFFU
192 
193 #define PHY_READ_TO 0x0000FFFFU
194 #define PHY_WRITE_TO 0x0000FFFFU
195 
196 /* Section 3: Common PHY Registers */
197 
198 #define PHY_BCR ((uint16_t)0x00)
199 #define PHY_BSR ((uint16_t)0x01)
201 #define PHY_RESET ((uint16_t)0x8000)
202 #define PHY_LOOPBACK ((uint16_t)0x4000)
203 #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100)
204 #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000)
205 #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100)
206 #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000)
207 #define PHY_AUTONEGOTIATION ((uint16_t)0x1000)
208 #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200)
209 #define PHY_POWERDOWN ((uint16_t)0x0800)
210 #define PHY_ISOLATE ((uint16_t)0x0400)
212 #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020)
213 #define PHY_LINKED_STATUS ((uint16_t)0x0004)
214 #define PHY_JABBER_DETECTION ((uint16_t)0x0002)
216 /* Section 4: Extended PHY Registers */
217 #define PHY_SR ((uint16_t)0x10U)
219 #define PHY_SPEED_STATUS ((uint16_t)0x0002U)
220 #define PHY_DUPLEX_STATUS ((uint16_t)0x0004U)
222 /* ################## SPI peripheral configuration ########################## */
223 
224 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
225 * Activated: CRC code is present inside driver
226 * Deactivated: CRC code cleaned from driver
227 */
228 
229 #define USE_SPI_CRC 0U
230 
231 /* Includes ------------------------------------------------------------------*/
236 #ifdef HAL_RCC_MODULE_ENABLED
237 #include "stm32f1xx_hal_rcc.h"
238 #endif /* HAL_RCC_MODULE_ENABLED */
239 
240 #ifdef HAL_GPIO_MODULE_ENABLED
241 #include "stm32f1xx_hal_gpio.h"
242 #endif /* HAL_GPIO_MODULE_ENABLED */
243 
244 #ifdef HAL_EXTI_MODULE_ENABLED
245 #include "stm32f1xx_hal_exti.h"
246 #endif /* HAL_EXTI_MODULE_ENABLED */
247 
248 #ifdef HAL_DMA_MODULE_ENABLED
249 #include "stm32f1xx_hal_dma.h"
250 #endif /* HAL_DMA_MODULE_ENABLED */
251 
252 #ifdef HAL_ETH_MODULE_ENABLED
253 #include "stm32f1xx_hal_eth.h"
254 #endif /* HAL_ETH_MODULE_ENABLED */
255 
256 #ifdef HAL_CAN_MODULE_ENABLED
257 #include "stm32f1xx_hal_can.h"
258 #endif /* HAL_CAN_MODULE_ENABLED */
259 
260 #ifdef HAL_CAN_LEGACY_MODULE_ENABLED
261  #include "Legacy/stm32f1xx_hal_can_legacy.h"
262 #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
263 
264 #ifdef HAL_CEC_MODULE_ENABLED
265 #include "stm32f1xx_hal_cec.h"
266 #endif /* HAL_CEC_MODULE_ENABLED */
267 
268 #ifdef HAL_CORTEX_MODULE_ENABLED
269 #include "stm32f1xx_hal_cortex.h"
270 #endif /* HAL_CORTEX_MODULE_ENABLED */
271 
272 #ifdef HAL_ADC_MODULE_ENABLED
273 #include "stm32f1xx_hal_adc.h"
274 #endif /* HAL_ADC_MODULE_ENABLED */
275 
276 #ifdef HAL_CRC_MODULE_ENABLED
277 #include "stm32f1xx_hal_crc.h"
278 #endif /* HAL_CRC_MODULE_ENABLED */
279 
280 #ifdef HAL_DAC_MODULE_ENABLED
281 #include "stm32f1xx_hal_dac.h"
282 #endif /* HAL_DAC_MODULE_ENABLED */
283 
284 #ifdef HAL_FLASH_MODULE_ENABLED
285 #include "stm32f1xx_hal_flash.h"
286 #endif /* HAL_FLASH_MODULE_ENABLED */
287 
288 #ifdef HAL_SRAM_MODULE_ENABLED
289 #include "stm32f1xx_hal_sram.h"
290 #endif /* HAL_SRAM_MODULE_ENABLED */
291 
292 #ifdef HAL_NOR_MODULE_ENABLED
293 #include "stm32f1xx_hal_nor.h"
294 #endif /* HAL_NOR_MODULE_ENABLED */
295 
296 #ifdef HAL_I2C_MODULE_ENABLED
297 #include "stm32f1xx_hal_i2c.h"
298 #endif /* HAL_I2C_MODULE_ENABLED */
299 
300 #ifdef HAL_I2S_MODULE_ENABLED
301 #include "stm32f1xx_hal_i2s.h"
302 #endif /* HAL_I2S_MODULE_ENABLED */
303 
304 #ifdef HAL_IWDG_MODULE_ENABLED
305 #include "stm32f1xx_hal_iwdg.h"
306 #endif /* HAL_IWDG_MODULE_ENABLED */
307 
308 #ifdef HAL_PWR_MODULE_ENABLED
309 #include "stm32f1xx_hal_pwr.h"
310 #endif /* HAL_PWR_MODULE_ENABLED */
311 
312 #ifdef HAL_RTC_MODULE_ENABLED
313 #include "stm32f1xx_hal_rtc.h"
314 #endif /* HAL_RTC_MODULE_ENABLED */
315 
316 #ifdef HAL_PCCARD_MODULE_ENABLED
317 #include "stm32f1xx_hal_pccard.h"
318 #endif /* HAL_PCCARD_MODULE_ENABLED */
319 
320 #ifdef HAL_SD_MODULE_ENABLED
321 #include "stm32f1xx_hal_sd.h"
322 #endif /* HAL_SD_MODULE_ENABLED */
323 
324 #ifdef HAL_NAND_MODULE_ENABLED
325 #include "stm32f1xx_hal_nand.h"
326 #endif /* HAL_NAND_MODULE_ENABLED */
327 
328 #ifdef HAL_SPI_MODULE_ENABLED
329 #include "stm32f1xx_hal_spi.h"
330 #endif /* HAL_SPI_MODULE_ENABLED */
331 
332 #ifdef HAL_TIM_MODULE_ENABLED
333 #include "stm32f1xx_hal_tim.h"
334 #endif /* HAL_TIM_MODULE_ENABLED */
335 
336 #ifdef HAL_UART_MODULE_ENABLED
337 #include "stm32f1xx_hal_uart.h"
338 #endif /* HAL_UART_MODULE_ENABLED */
339 
340 #ifdef HAL_USART_MODULE_ENABLED
341 #include "stm32f1xx_hal_usart.h"
342 #endif /* HAL_USART_MODULE_ENABLED */
343 
344 #ifdef HAL_IRDA_MODULE_ENABLED
345 #include "stm32f1xx_hal_irda.h"
346 #endif /* HAL_IRDA_MODULE_ENABLED */
347 
348 #ifdef HAL_SMARTCARD_MODULE_ENABLED
349 #include "stm32f1xx_hal_smartcard.h"
350 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
351 
352 #ifdef HAL_WWDG_MODULE_ENABLED
353 #include "stm32f1xx_hal_wwdg.h"
354 #endif /* HAL_WWDG_MODULE_ENABLED */
355 
356 #ifdef HAL_PCD_MODULE_ENABLED
357 #include "stm32f1xx_hal_pcd.h"
358 #endif /* HAL_PCD_MODULE_ENABLED */
359 
360 #ifdef HAL_HCD_MODULE_ENABLED
361 #include "stm32f1xx_hal_hcd.h"
362 #endif /* HAL_HCD_MODULE_ENABLED */
363 
364 #ifdef HAL_MMC_MODULE_ENABLED
365 #include "stm32f1xx_hal_mmc.h"
366 #endif /* HAL_MMC_MODULE_ENABLED */
367 
368 /* Exported macro ------------------------------------------------------------*/
369 #ifdef USE_FULL_ASSERT
370 
378 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
379 /* Exported functions ------------------------------------------------------- */
380 void assert_failed(uint8_t* file, uint32_t line);
381 #else
382 #define assert_param(expr) ((void)0U)
383 #endif /* USE_FULL_ASSERT */
384 
385 #ifdef __cplusplus
386 }
387 #endif
388 
389 #endif /* __STM32F1xx_HAL_CONF_H */
390 
391 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
stm32f1xx_hal_gpio.h
Header file of GPIO HAL module.
stm32f1xx_hal_cortex.h
Header file of CORTEX HAL module.
stm32f1xx_hal_exti.h
Header file of EXTI HAL module.
stm32f1xx_hal_rcc.h
Header file of RCC HAL module.
stm32f1xx_hal_tim.h
Header file of TIM HAL module.
stm32f1xx_hal_dma.h
Header file of DMA HAL module.
stm32f1xx_hal_flash.h
Header file of Flash HAL module.
stm32f1xx_hal_pwr.h
Header file of PWR HAL module.
stm32f1xx_hal_can.h
Header file of CAN HAL module.
Generated by   doxygen 1.8.13