The QDataStream class provides serialization of binary data to a QIODevice. More...

#include <qdatastream.h>

Public Types
enum	ByteOrder { BigEndian, LittleEndian }

Public Member Functions
	QDataStream ()

	QDataStream (QIODevice *)

	QDataStream (QByteArray, int mode)

virtual	~QDataStream ()

QIODevice *	device () const

void	setDevice (QIODevice *)

void	unsetDevice ()

bool	atEnd () const

bool	eof () const

int	byteOrder () const

void	setByteOrder (int)

bool	isPrintableData () const

void	setPrintableData (bool)

int	version () const

void	setVersion (int)

QDataStream &	operator>> (Q_INT8 &i)

QDataStream &	operator>> (Q_UINT8 &i)

QDataStream &	operator>> (Q_INT16 &i)

QDataStream &	operator>> (Q_UINT16 &i)

QDataStream &	operator>> (Q_INT32 &i)

QDataStream &	operator>> (Q_UINT32 &i)

QDataStream &	operator>> (Q_INT64 &i)

QDataStream &	operator>> (Q_UINT64 &i)

QDataStream &	operator>> (float &f)

QDataStream &	operator>> (double &f)

QDataStream &	operator>> (char *&str)

QDataStream &	operator<< (Q_INT8 i)

QDataStream &	operator<< (Q_UINT8 i)

QDataStream &	operator<< (Q_INT16 i)

QDataStream &	operator<< (Q_UINT16 i)

QDataStream &	operator<< (Q_INT32 i)

QDataStream &	operator<< (Q_UINT32 i)

QDataStream &	operator<< (Q_INT64 i)

QDataStream &	operator<< (Q_UINT64 i)

QDataStream &	operator<< (float f)

QDataStream &	operator<< (double f)

QDataStream &	operator<< (const char *str)

QDataStream &	readBytes (char *&, uint &len)

QDataStream &	readRawBytes (char *, uint len)

QDataStream &	writeBytes (const char *, uint len)

QDataStream &	writeRawBytes (const char *, uint len)

Detailed Description

The QDataStream class provides serialization of binary data to a QIODevice.

A data stream is a binary stream of encoded information which is 100% independent of the host computer operation system, CPU or byte order. A stream that is written by a PC under DOS/Windows can be read by a Sun SPARC running Solaris.

The QDataStream class implements serialization of primitive types, like char, short, int, char* etc. Serialization of more complex data is accomplished by breaking up the data into primitive units.

The programmer can select which byte order to use when serializing data. The default setting is big endian (MSB first). Changing it to little endian breaks the portability (unless the reader also changes to little endian). We recommend keeping this setting unless you have special requirements.

A data stream cooperates closely with a QIODevice. A QIODevice represents an input/output medium one can read data from and write data to. The QFile class is an example of an IO device.

Example (write data to a stream):

QFile f( "file.dta" );
f.open( IO_WriteOnly );           // open file for writing
QDataStream s( &f );          // serialize using f
s << "the answer is";         // serialize string
s << (Q_INT32)42;             // serialize integer

Example (read data from a stream):

QFile f( "file.dta" );
f.open( IO_ReadOnly );            // open file for reading
QDataStream s( &f );          // serialize using f
char   *str;
Q_INT32 a;
s >> str >> a;                // "the answer is" and 42
delete str;                   // delete string

In the last example, if you read into a QString instead of a char* you do not have to delete it.

Normally, each item written to the stream is written in a fixed binary format. For example, a char* is written as a 32-bit integer equal to the length of the string including the NUL byte, followed by all the characters of the string including the NUL byte. Similarly when reading a string, 4 bytes are read to create the 32-bit length value, then that many characters for the string including the NUL. For a complete description of all Qt types supporting data streaming see Format of the QDataStream operators .

If you want a "parsing" input stream, see QTextStream. If you just want the data to be human-readable to aid in debugging, you can set the data stream into printable data mode with setPrintableData(). The data is then written slower, in a human readable bloated form that is sufficient for debugging.

If you are producing a new binary data format, such as a file format for documents created by your application, you could use a QDataStream to write the data in a portable format. Typically, you would write a brief header containing a magic string and a version number to give yourself room for future expansion. For example:

// Open the file.
QFile f( "file.xxx" );
f.open( IO_WriteOnly );
QDataStream s( &f );
// Write a header with a "magic number" and a version
s << 0xa0b0c0d0;
s << 123;
// Write the data
s << [lots of interesting data]

Then read it in with:

// Open the file.
QFile f( "file.xxx" );
f.open( IO_ReadOnly );
QDataStream s( &f );
// Read and check the header
Q_UINT32 magic;
s >> magic;
if ( magic != 0xa0b0c0d0 )
return XXX_BAD_FILE_FORMAT;
// Read the version
Q_INT32 version;
s >> version;
if ( version < 100 )
return XXX_BAD_FILE_TOO_OLD;
if ( version > 123 )
return XXX_BAD_FILE_TOO_NEW;
if ( version <= 110 )
s.setVersion(1);
// Read the data
s >> [lots of interesting data];
if ( version > 120 )
s >> [data new in XXX version 1.2];
s >> [other interesting data];

See also: QTextStream QVariant

Constructor & Destructor Documentation

§ QDataStream() [1/3]

QDataStream::QDataStream ( )

Constructs a data stream that has no IO device.

See also: setDevice()

§ QDataStream() [2/3]

QDataStream::QDataStream ( QIODevice * d )

Constructs a data stream that uses the IO device d.

See also: setDevice(), device()

§ QDataStream() [3/3]

QDataStream::QDataStream	(	QByteArray	a,
		int	mode
	)

Constructs a data stream that operates on a byte array through an internal QBuffer device.

Example:

static char bindata[] = { 231, 1, 44, ... };
QByteArray    a;
a.setRawData( bindata, sizeof(bindata) ); // a points to bindata
QDataStream s( a, IO_ReadOnly );      // open on a's data
s >> [something];             // read raw bindata
a.resetRawData( bindata, sizeof(bindata) ); // finished

The QArray::setRawData() function is not for the inexperienced.

§ ~QDataStream()

QDataStream::~QDataStream ( )

virtual

Destructs the data stream.

The destructor will not affect the current IO device, unless it is an internal IO device processing a QByteArray passed in the constructor.

Member Function Documentation

§ atEnd()

bool QDataStream::atEnd ( ) const

inline

Returns TRUE if the IO device has reached the end position (end of stream or file) or if there is no IO device set.

Returns FALSE if the current position of the read/write head of the IO device is somewhere before the end position.

See also: QIODevice::atEnd()

§ byteOrder()

int QDataStream::byteOrder ( ) const

inline

Returns the current byte order setting - either BigEndian or LittleEndian.

See also: setByteOrder()

§ device()

QIODevice * QDataStream::device ( ) const

inline

Returns the IO device currently set.

See also: setDevice(), unsetDevice()

§ eof()

bool QDataStream::eof ( ) const

inline

Returns TRUE if the IO device has reached the end position (end of stream or file) or if there is no IO device set.

Returns FALSE if the current position of the read/write head of the IO device is somewhere before the end position.

See also: QIODevice::atEnd()

§ isPrintableData()

bool QDataStream::isPrintableData ( ) const

inline

Returns TRUE if the printable data flag has been set.

See also: setPrintableData()

§ operator<<() [1/11]

QDataStream & QDataStream::operator<< ( Q_INT8 i )

Writes a signed byte to the stream.

§ operator<<() [2/11]

QDataStream & QDataStream::operator<< ( Q_UINT8 i )

inline

Writes an unsigned byte to the stream and returns a reference to the stream.

§ operator<<() [3/11]

QDataStream & QDataStream::operator<< ( Q_INT16 i )

Writes a signed 16-bit integer to the stream and returns a reference to the stream.

§ operator<<() [4/11]

QDataStream & QDataStream::operator<< ( Q_UINT16 i )

inline

Writes an unsigned 16-bit integer to the stream and returns a reference to the stream.

§ operator<<() [5/11]

QDataStream & QDataStream::operator<< ( Q_INT32 i )

Writes a signed 32-bit integer to the stream and returns a reference to the stream.

Writes a signed integer to the stream as a 32-bit signed integer (Q_INT32). Returns a reference to the stream.

§ operator<<() [6/11]

QDataStream & QDataStream::operator<< ( Q_UINT32 i )

inline

Writes an unsigned 32-bit integer to the stream and returns a reference to the stream.

§ operator<<() [7/11]

QDataStream & QDataStream::operator<< ( Q_INT64 i )

Writes a signed 64-bit integer to the stream and returns a reference to the stream, or calls the Q_INT32-operator if 64 bit is not available.

§ operator<<() [8/11]

QDataStream & QDataStream::operator<< ( Q_UINT64 i )

inline

Writes an unsigned 64-bit integer to the stream and returns a reference to the stream, or uses the Q_UINT32-operator if 64 bit is not available.

§ operator<<() [9/11]

QDataStream & QDataStream::operator<< ( float f )

Writes a 32-bit floating point number to the stream using the standard IEEE754 format. Returns a reference to the stream.

§ operator<<() [10/11]

QDataStream & QDataStream::operator<< ( double f )

Writes a 64-bit floating point number to the stream using the standard IEEE754 format. Returns a reference to the stream.

§ operator<<() [11/11]

QDataStream & QDataStream::operator<< ( const char * s )

Writes the '\0'-terminated string s to the stream and returns a reference to the stream.

The string is serialized using writeBytes().

§ operator>>() [1/11]

QDataStream & QDataStream::operator>> ( Q_INT8 & i )

Reads a signed byte from the stream.

§ operator>>() [2/11]

QDataStream & QDataStream::operator>> ( Q_UINT8 & i )

inline

Reads an unsigned byte from the stream and returns a reference to the stream.

§ operator>>() [3/11]

QDataStream & QDataStream::operator>> ( Q_INT16 & i )

Reads a signed 16-bit integer from the stream and returns a reference to the stream.

§ operator>>() [4/11]

QDataStream & QDataStream::operator>> ( Q_UINT16 & i )

inline

Reads an unsigned 16-bit integer from the stream and returns a reference to the stream.

§ operator>>() [5/11]

QDataStream & QDataStream::operator>> ( Q_INT32 & i )

Reads a signed 32-bit integer from the stream and returns a reference to the stream.

§ operator>>() [6/11]

QDataStream & QDataStream::operator>> ( Q_UINT32 & i )

inline

Reads an unsigned 32-bit integer from the stream and returns a reference to the stream.

§ operator>>() [7/11]

QDataStream & QDataStream::operator>> ( Q_INT64 & i )

Reads a signed 64-bit integer from the stream and returns a reference to the stream, or uses the Q_UINT32 operator if 64 bit is not available.

§ operator>>() [8/11]

QDataStream & QDataStream::operator>> ( Q_UINT64 & i )

inline

Reads an unsigned 64-bit integer from the stream and returns a reference to the stream, or uses the Q_UINT32 operator if 64 bit is not available.

§ operator>>() [9/11]

QDataStream & QDataStream::operator>> ( float & f )

Reads a 32-bit floating point number from the stream using the standard IEEE754 format. Returns a reference to the stream.

§ operator>>() [10/11]

QDataStream & QDataStream::operator>> ( double & f )

Reads a 64-bit floating point number from the stream using the standard IEEE754 format. Returns a reference to the stream.

§ operator>>() [11/11]

QDataStream & QDataStream::operator>> ( char *& s )

Reads the '\0'-terminated string s from the stream and returns a reference to the stream.

Space for the string is allocated using new - the caller must eventually call delete[] on the value.

§ readBytes()

QDataStream & QDataStream::readBytes	(	char *&	s,
		uint &	l
	)

Reads the buffer s from the stream and returns a reference to the stream.

The buffer s is allocated using new. Destroy it with the delete[] operator. If the length is zero or s cannot be allocated, s is set to 0.

The l parameter will be set to the length of the buffer.

The serialization format is an Q_UINT32 length specifier first, then the data (l bytes).

See also: readRawBytes(), writeBytes()

§ readRawBytes()

QDataStream & QDataStream::readRawBytes	(	char *	s,
		uint	len
	)

Reads len bytes from the stream into s and returns a reference to the stream.

The buffer s must be preallocated.

See also: readBytes(), QIODevice::readBlock(), writeRawBytes()

§ setByteOrder()

void QDataStream::setByteOrder ( int bo )

Sets the serialization byte order to bo.

The bo parameter can be QDataStream::BigEndian or QDataStream::LittleEndian.

The default setting is big endian. We recommend leaving this setting unless you have special requirements.

See also: byteOrder()

§ setDevice()

void QDataStream::setDevice ( QIODevice * d )

void QDataStream::setDevice(QIODevice *d ) Sets the IO device to d.

See also: device(), unsetDevice()

§ setPrintableData()

void QDataStream::setPrintableData ( bool enable )

inline

Sets or clears the printable data flag.

If this flag is set, the write functions will generate output that consists of printable characters (7 bit ASCII).

We recommend enabling printable data only for debugging purposes (it is slower and creates larger output).

§ setVersion()

void QDataStream::setVersion ( int v )

inline

Sets the version number of the data serialization format.

In order to accomodate for new functionality, the datastream serialization format of some Qt classes has changed in some versions of Qt. If you want to read data that was created by an earlier version of Qt, or write data that can be read by a program that was compiled with an earlier version of Qt, use this function to modify the serialization format of QDataStream.

For Qt 1.x compatibility, use v == 1.

For Qt 2.0.x compatibility, use v == 2 (Not required for reading in Qt 2.1).

See also: version()

§ unsetDevice()

void QDataStream::unsetDevice ( )

Unsets the IO device. This is the same as calling setDevice( 0 ).

See also: device(), setDevice()

§ version()

int QDataStream::version ( ) const

inline

Returns the version number of the data serialization format. In Qt 2.1, this number is by default 3.

See also: setVersion()

§ writeBytes()

QDataStream & QDataStream::writeBytes	(	const char *	s,
		uint	len
	)

Writes the length specifier len and the buffer s to the stream and returns a reference to the stream.

The len is serialized as an Q_UINT32, followed by len bytes from s.

See also: writeRawBytes(), readBytes()

§ writeRawBytes()

QDataStream & QDataStream::writeRawBytes	(	const char *	s,
		uint	len
	)

Writes len bytes from s to the stream and returns a reference to the stream.

See also: writeBytes(), QIODevice::writeBlock(), readRawBytes()

The documentation for this class was generated from the following files:

qtools/qdatastream.h
qtools/qdatastream.cpp

Public Types

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

§ QDataStream() [1/3]

§ QDataStream() [2/3]

§ QDataStream() [3/3]

§ ~QDataStream()

Member Function Documentation

§ atEnd()

§ byteOrder()

§ device()

§ eof()

§ isPrintableData()

§ operator<<() [1/11]

§ operator<<() [2/11]

§ operator<<() [3/11]

§ operator<<() [4/11]

§ operator<<() [5/11]

§ operator<<() [6/11]

§ operator<<() [7/11]

§ operator<<() [8/11]

§ operator<<() [9/11]

§ operator<<() [10/11]

§ operator<<() [11/11]

§ operator>>() [1/11]

§ operator>>() [2/11]

§ operator>>() [3/11]

§ operator>>() [4/11]

§ operator>>() [5/11]

§ operator>>() [6/11]

§ operator>>() [7/11]

§ operator>>() [8/11]

§ operator>>() [9/11]

§ operator>>() [10/11]

§ operator>>() [11/11]

§ readBytes()

§ readRawBytes()

§ setByteOrder()

§ setDevice()

§ setPrintableData()

§ setVersion()

§ unsetDevice()

§ version()

§ writeBytes()

§ writeRawBytes()