This section propose definition to remap the alternate function to some other port/pins. More...
Collaboration diagram for Alternate Function Remapping:
|
Macros | |
| #define | __HAL_AFIO_REMAP_SPI1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP) |
| Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. More... | |
| #define | __HAL_AFIO_REMAP_SPI1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP) |
| Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. More... | |
| #define | __HAL_AFIO_REMAP_I2C1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP) |
| Enable the remapping of I2C1 alternate function SCL and SDA. More... | |
| #define | __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP) |
| Disable the remapping of I2C1 alternate function SCL and SDA. More... | |
| #define | __HAL_AFIO_REMAP_USART1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP) |
| Enable the remapping of USART1 alternate function TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP) |
| Disable the remapping of USART1 alternate function TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_USART2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP) |
| Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP) |
| Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_USART3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) |
| Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_USART3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) |
| Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_USART3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) |
| Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. More... | |
| #define | __HAL_AFIO_REMAP_TIM1_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) |
| Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) More... | |
| #define | __HAL_AFIO_REMAP_TIM1_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) |
| Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) More... | |
| #define | __HAL_AFIO_REMAP_TIM1_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) |
| Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) More... | |
| #define | __HAL_AFIO_REMAP_TIM2_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
| Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) More... | |
| #define | __HAL_AFIO_REMAP_TIM2_PARTIAL_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
| Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) More... | |
| #define | __HAL_AFIO_REMAP_TIM2_PARTIAL_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
| Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) More... | |
| #define | __HAL_AFIO_REMAP_TIM2_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
| Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) More... | |
| #define | __HAL_AFIO_REMAP_TIM3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) |
| Enable the remapping of TIM3 alternate function channels 1 to 4. More... | |
| #define | __HAL_AFIO_REMAP_TIM3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) |
| Enable the remapping of TIM3 alternate function channels 1 to 4. More... | |
| #define | __HAL_AFIO_REMAP_TIM3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) |
| Disable the remapping of TIM3 alternate function channels 1 to 4. More... | |
| #define | __HAL_AFIO_REMAP_TIM4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP) |
| Enable the remapping of TIM4 alternate function channels 1 to 4. More... | |
| #define | __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP) |
| Disable the remapping of TIM4 alternate function channels 1 to 4. More... | |
| #define | __HAL_AFIO_REMAP_PD01_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP) |
| Enable the remapping of PD0 and PD1. More... | |
| #define | __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP) |
| Disable the remapping of PD0 and PD1. More... | |
| #define | __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) |
| Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). More... | |
| #define | __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) |
| Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). More... | |
| #define | __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) |
| Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). More... | |
| #define | __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) |
| Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). More... | |
| #define | __HAL_AFIO_REMAP_SWJ_ENABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET) |
| Enable the Serial wire JTAG configuration. More... | |
| #define | __HAL_AFIO_REMAP_SWJ_NONJTRST() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST) |
| Enable the Serial wire JTAG configuration. More... | |
| #define | __HAL_AFIO_REMAP_SWJ_NOJTAG() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE) |
| Enable the Serial wire JTAG configuration. More... | |
| #define | __HAL_AFIO_REMAP_SWJ_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE) |
| Disable the Serial wire JTAG configuration. More... | |
Detailed Description
This section propose definition to remap the alternate function to some other port/pins.
Macro Definition Documentation
◆ __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE
| #define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) |
Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
- Note
- DISABLE: ADC1 External trigger injected conversion is connected to EXTI15
- Return values
-
None
◆ __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE
| #define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP) |
Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
- Note
- ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4.
- Return values
-
None
◆ __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE
| #define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) |
Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
- Note
- DISABLE: ADC1 External trigger regular conversion is connected to EXTI11
- Return values
-
None
◆ __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE
| #define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP) |
Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
- Note
- ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0.
- Return values
-
None
◆ __HAL_AFIO_REMAP_I2C1_DISABLE
| #define __HAL_AFIO_REMAP_I2C1_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP) |
Disable the remapping of I2C1 alternate function SCL and SDA.
- Note
- DISABLE: No remap (SCL/PB6, SDA/PB7)
- Return values
-
None
◆ __HAL_AFIO_REMAP_I2C1_ENABLE
| #define __HAL_AFIO_REMAP_I2C1_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP) |
Enable the remapping of I2C1 alternate function SCL and SDA.
- Note
- ENABLE: Remap (SCL/PB8, SDA/PB9)
- Return values
-
None
◆ __HAL_AFIO_REMAP_PD01_DISABLE
| #define __HAL_AFIO_REMAP_PD01_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP) |
Disable the remapping of PD0 and PD1.
When the HSE oscillator is not used (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available on 100-pin and 144-pin packages, no need for remapping).
- Note
- DISABLE: No remapping of PD0 and PD1
- Return values
-
None
◆ __HAL_AFIO_REMAP_PD01_ENABLE
| #define __HAL_AFIO_REMAP_PD01_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP) |
Enable the remapping of PD0 and PD1.
When the HSE oscillator is not used (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available on 100-pin and 144-pin packages, no need for remapping).
- Note
- ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT.
- Return values
-
None
◆ __HAL_AFIO_REMAP_SPI1_DISABLE
| #define __HAL_AFIO_REMAP_SPI1_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP) |
Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
- Note
- DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7)
- Return values
-
None
◆ __HAL_AFIO_REMAP_SPI1_ENABLE
| #define __HAL_AFIO_REMAP_SPI1_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP) |
Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
- Note
- ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5)
- Return values
-
None
◆ __HAL_AFIO_REMAP_SWJ_DISABLE
| #define __HAL_AFIO_REMAP_SWJ_DISABLE | ( | ) | AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE) |
Disable the Serial wire JTAG configuration.
- Note
- DISABLE: JTAG-DP Disabled and SW-DP Disabled
- Return values
-
None
◆ __HAL_AFIO_REMAP_SWJ_ENABLE
| #define __HAL_AFIO_REMAP_SWJ_ENABLE | ( | ) | AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET) |
Enable the Serial wire JTAG configuration.
- Note
- ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State
- Return values
-
None
◆ __HAL_AFIO_REMAP_SWJ_NOJTAG
| #define __HAL_AFIO_REMAP_SWJ_NOJTAG | ( | ) | AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE) |
Enable the Serial wire JTAG configuration.
- Note
- NOJTAG: JTAG-DP Disabled and SW-DP Enabled
- Return values
-
None
◆ __HAL_AFIO_REMAP_SWJ_NONJTRST
| #define __HAL_AFIO_REMAP_SWJ_NONJTRST | ( | ) | AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST) |
Enable the Serial wire JTAG configuration.
- Note
- NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM1_DISABLE
| #define __HAL_AFIO_REMAP_TIM1_DISABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) |
Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
- Note
- DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM1_ENABLE
| #define __HAL_AFIO_REMAP_TIM1_ENABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) |
Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
- Note
- ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM1_PARTIAL
| #define __HAL_AFIO_REMAP_TIM1_PARTIAL | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) |
Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
- Note
- PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM2_DISABLE
| #define __HAL_AFIO_REMAP_TIM2_DISABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- Note
- DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM2_ENABLE
| #define __HAL_AFIO_REMAP_TIM2_ENABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- Note
- ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM2_PARTIAL_1
| #define __HAL_AFIO_REMAP_TIM2_PARTIAL_1 | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- Note
- PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM2_PARTIAL_2
| #define __HAL_AFIO_REMAP_TIM2_PARTIAL_2 | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP) |
Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- Note
- PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11)
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM3_DISABLE
| #define __HAL_AFIO_REMAP_TIM3_DISABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) |
Disable the remapping of TIM3 alternate function channels 1 to 4.
- Note
- DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1)
- TIM3_ETR on PE0 is not re-mapped.
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM3_ENABLE
| #define __HAL_AFIO_REMAP_TIM3_ENABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) |
Enable the remapping of TIM3 alternate function channels 1 to 4.
- Note
- ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9)
- TIM3_ETR on PE0 is not re-mapped.
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM3_PARTIAL
| #define __HAL_AFIO_REMAP_TIM3_PARTIAL | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) |
Enable the remapping of TIM3 alternate function channels 1 to 4.
- Note
- PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1)
- TIM3_ETR on PE0 is not re-mapped.
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM4_DISABLE
| #define __HAL_AFIO_REMAP_TIM4_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP) |
Disable the remapping of TIM4 alternate function channels 1 to 4.
- Note
- DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9)
- TIM4_ETR on PE0 is not re-mapped.
- Return values
-
None
◆ __HAL_AFIO_REMAP_TIM4_ENABLE
| #define __HAL_AFIO_REMAP_TIM4_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP) |
Enable the remapping of TIM4 alternate function channels 1 to 4.
- Note
- ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15)
- TIM4_ETR on PE0 is not re-mapped.
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART1_DISABLE
| #define __HAL_AFIO_REMAP_USART1_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP) |
Disable the remapping of USART1 alternate function TX and RX.
- Note
- DISABLE: No remap (TX/PA9, RX/PA10)
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART1_ENABLE
| #define __HAL_AFIO_REMAP_USART1_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP) |
Enable the remapping of USART1 alternate function TX and RX.
- Note
- ENABLE: Remap (TX/PB6, RX/PB7)
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART2_DISABLE
| #define __HAL_AFIO_REMAP_USART2_DISABLE | ( | ) | AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP) |
Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
- Note
- DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4)
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART2_ENABLE
| #define __HAL_AFIO_REMAP_USART2_ENABLE | ( | ) | AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP) |
Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
- Note
- ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7)
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART3_DISABLE
| #define __HAL_AFIO_REMAP_USART3_DISABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) |
Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
- Note
- DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14)
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART3_ENABLE
| #define __HAL_AFIO_REMAP_USART3_ENABLE | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) |
Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
- Note
- ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12)
- Return values
-
None
◆ __HAL_AFIO_REMAP_USART3_PARTIAL
| #define __HAL_AFIO_REMAP_USART3_PARTIAL | ( | ) | AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) |
Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
- Note
- PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14)
- Return values
-
None
