Collaboration diagram for PWR Exported Macros:

Macros
#define	__HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
	Check PWR flag is set or not. More...

#define	__HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2))
	Clear the PWR's pending flags. More...

#define	__HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
	Enable interrupt on PVD Exti Line 16. More...

#define	__HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
	Disable interrupt on PVD Exti Line 16. More...

#define	__HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
	Enable event on PVD Exti Line 16. More...

#define	__HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
	Disable event on PVD Exti Line 16. More...

#define	__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
	PVD EXTI line configuration: set falling edge trigger. More...

#define	__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
	Disable the PVD Extended Interrupt Falling Trigger. More...

#define	__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
	PVD EXTI line configuration: set rising edge trigger. More...

#define	__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
	Disable the PVD Extended Interrupt Rising Trigger. More...

#define	__HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
	PVD EXTI line configuration: set rising & falling edge trigger. More...

#define	__HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
	Disable the PVD Extended Interrupt Rising & Falling Trigger. More...

#define	__HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
	Check whether the specified PVD EXTI interrupt flag is set or not. More...

#define	__HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
	Clear the PVD EXTI flag. More...

#define	__HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
	Generate a Software interrupt on selected EXTI line. More...

Detailed Description

Macro Definition Documentation

◆ __HAL_PWR_CLEAR_FLAG

#define __HAL_PWR_CLEAR_FLAG ( __FLAG__ ) SET_BIT(PWR->CR, ((__FLAG__) << 2))

Clear the PWR's pending flags.

Parameters

specifies the flag to clear. This parameter can be one of the following values:

PWR_FLAG_WU: Wake Up flag
PWR_FLAG_SB: StandBy flag

◆ __HAL_PWR_GET_FLAG

#define __HAL_PWR_GET_FLAG ( __FLAG__ ) ((PWR->CSR & (__FLAG__)) == (__FLAG__))

Check PWR flag is set or not.

Parameters

specifies the flag to check. This parameter can be one of the following values:

PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event was received from the WKUP pin or from the RTC alarm An additional wakeup event is detected if the WKUP pin is enabled (by setting the EWUP bit) when the WKUP pin level is already high.
PWR_FLAG_SB: StandBy flag. This flag indicates that the system was resumed from StandBy mode.
PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode For this reason, this bit is equal to 0 after Standby or reset until the PVDE bit is set.

Return values

The	new state of FLAG (TRUE or FALSE).

◆ __HAL_PWR_PVD_EXTI_CLEAR_FLAG

#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG ( ) (EXTI->PR = (PWR_EXTI_LINE_PVD))

Clear the PVD EXTI flag.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_DISABLE_EVENT

#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT ( ) CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)

Disable event on PVD Exti Line 16.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE

#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE ( ) CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)

Disable the PVD Extended Interrupt Falling Trigger.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_DISABLE_IT

#define __HAL_PWR_PVD_EXTI_DISABLE_IT ( ) CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)

Disable interrupt on PVD Exti Line 16.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE

#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE ( ) CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)

Disable the PVD Extended Interrupt Rising Trigger.

This parameter can be:

Return values

None.

◆ __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE

#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE ( ) __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();

Disable the PVD Extended Interrupt Rising & Falling Trigger.

This parameter can be:

Return values

None.

◆ __HAL_PWR_PVD_EXTI_ENABLE_EVENT

#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT ( ) SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)

Enable event on PVD Exti Line 16.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE

#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE ( ) SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)

PVD EXTI line configuration: set falling edge trigger.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_ENABLE_IT

#define __HAL_PWR_PVD_EXTI_ENABLE_IT ( ) SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)

Enable interrupt on PVD Exti Line 16.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE

#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE ( ) SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)

PVD EXTI line configuration: set rising edge trigger.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE

#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE ( ) __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();

PVD EXTI line configuration: set rising & falling edge trigger.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_GENERATE_SWIT

#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT ( ) SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)

Generate a Software interrupt on selected EXTI line.

Return values

None.

◆ __HAL_PWR_PVD_EXTI_GET_FLAG

#define __HAL_PWR_PVD_EXTI_GET_FLAG ( ) (EXTI->PR & (PWR_EXTI_LINE_PVD))

Check whether the specified PVD EXTI interrupt flag is set or not.

Return values

EXTI	PVD Line Status.